Please try another working Ethernet cable or LAN port on the TP-Link router. For routers with only one indicator/LED, you may check whether the device itself has detected the Ethernet connection or not. If yes, go to the next step. 2.Reboot both the device and the router. 3.Connect another device to the router using the same Ethernet cable on If you did not intentionally go into the network adapter's configuration settings and reset them to match the required network configuration then there will be no connectivity. Make and model information for modem, router, or modem/router if combined. Run "ipconfig /all" (without quotes) via the Command Prompt. If the Ethernet cable is still not recognized at the WAN port of the Express after a few tries, this would indicate that the WAN port on the Express has failed. How to reset your AirPort base station - Apple Supportsupport.apple.com › en-us. Depending on the exact type of modem that you have, you might be able to use the LAN <--> port on the Options. 04-08-2020 06:20 PM. Once connected by Ethernet to your router, enter the IP address, login, and password described on the plaque on the router. Once in the administration area, there is a whole section for managing Wi-Fi. You can turn your W-Fi off there. Open Device Manager (click Start, type Device Manager in the Search box, and press Enter) Double-click "Network adapters" to expand the section. If any of the items in the section show a warning icon, double-click on the item and report its "Device status". Please list the complete names of all of the items in the Network adapters section. Choose the wireless network manually. You might be close enough and everything could be set up correctly, but if Windows 11 isn't told to connect automatically, it might appear to be a network issue. Go to Network & Internet > Wi-Fi > Show available networks to find the Wi-Fi network. Select it and choose Connect automatically, and then Connect . .

router not recognizing ethernet cable